Table of Contents
Advertisement
SPECIFICATIONS
Model No.:
Supply voltage:
Motor power:
Max power take off:
Tank capacity:
Hose system:
Filter - dry:
Filter - wet:
IP rating:
Suction:
PTO Overload rating:
Cord length:
Hose length:
Self-Cleaning function:
Speed control function:
Dust extraction:
Net Weight:
Air flow volumn:
NOISE/VIBRATION INFORMATION
Noise emission values determined according to EN
60335-2-69.
Typically, the A-weighted sound pressure level of the
power tool is ≤78 dB(A).
Uncertainty K = 3 dB. The noise level when working can
exceed 80 dB(A).
Total vibration values ah (triax vector sum) and
uncertainty K determined according to
EN 60335-2-69: ah<2.5 m/s2, K =1.5 m/s2.
PACKAGING CONTENT
1
Undo the clamps, lift the top section off the tank and
remove the accessories from inside the tank.
ASSEMBLY
2
Turn the tank upside down, and insert the casters on to
the four feet of the tank.
Ensure that they are mounted correctly. Do not over
tighten
3
Lightly squeeze together the ends of the rataining
bracket and click it into the motor housing.
Insert the handle into the slots on the motor head and
fasten into place.
RACWDV30MC
220-240V ~ 50Hz
1500W
900W
30L
Ø35mm
Washable HEPA12 Cartridge Filter
Foam filter
IPX4
22kpa/3.19PSI
3.75A
10m
2.5m
Yes
Yes
M Class
8.9kgs
41L/s
ACCESSORIES FITTING
4
Insert the large end of the hose into the front inlet of the
tank (before this, remove the rubber pad first).
The nozzles and brushes can install to the hose directly,
or extended by the telescopic wand and air regulator
tube.
OPERATION
DRY VACUUMING
Ensure that you read, understand, and apply the
safety instructions.
Reminder: DO NOT vacuum hazardous substances.
The use of an incorrect dust bag will invalidate the
warranty.
5
Install the supplied dust bag to the inner joint and
cartridge filter over the filter basket.
Plug the power cord into the power outlet and turn the
motor on by flipping switch to
position when finish vacuuming, and unplug the power
cord.
DO NOT USE THE CARTRIDGE FILTER FOR WET
OR SHARP MATERIALS.
DO NOT USE DUST BAG FOR LIQUID VACUUMING.
DRY Vacuum - M class
6
To maintain M-class certification this vacuum cleaner must
be used with a disposable collection means. By removing
the dust bag and disposable bag when collecting debris the
user runs the risk of voiding vacuum cleaner certification.
To use a dust bag, fully fit the dust bag flange onto the
inlet stub.
To use a disposable bag, place the disposable bag into
the container, and fully fit the disposable bag flange onto
the inlet stub. Fold the top edge of the disposable bag
over the rim of the container.
To use a disposable bag and a dust bag together, place
the disposable bag into the container and fully fit the
disposable bag flange onto the inlet stub, and fold the top
edge of the disposable bag over the rim of the container,
then fully fit the dust bag flange onto the inlet stub.
3
WARNING
position and off to
WARNING
Advertisement
Table of Contents
