Specifications - Ryobi VC30A User Manual

SPECIAL SAFETY RULES
■ Never vacuum up hot ashes, pointed or sharp
objects.
■ Never use the appliance in damp rooms.
■ Don't use the appliance without a dust bag (an
exception is wet vacuuming or with the cartridge
filter). Make sure that the dust bag is inserted into the
appliance correctly.
When using the appliance, make sure that no hair or
■
clothing is drawn in.
■ Keep the vacuum cleaner away from heat sources
such as radiant heaters, ovens, and so on.
DISPOSAL INFORMATION
■
The appliance contains electric and electronic
components and may not be disposed of as
household garbage.
■
The local and currently applicable legislation must
be observed.

SPECIFICATIONS

VC30A
Supply voltage:
Max. power:
Psum:
Tank volume:
Hose system:
Filter - dry:
Filter - wet:
PACKAGING CONTENT
See figure 1-3
■
Carefully unpack the contents of the box.
■
Hold the two clamps, which hold the upper section
in its position and fold them upwards.
■
Loosen the clamps, remove the upper section,
and remove the contents from the tank.
■
Please check the parts using the components list
to make sure they are complete and that there
has been no damage in transport.
■
If any parts are missing or damaged, then please
contact your dealer immediately.
ASSEMBLY
■
Make sure that the connector is not plugged in.
■
Hold the two clamps, which hold the upper
section in its position and fold them upwards.
(Fig. 2)
■
Loosen the clamps and lift the upper section up
and out. (Fig. 3)
■
Remove the contents from the tank and turn the
tank over.
ROLLER ASSEMBLY
VC30A
■
Put the four rollers in the guides on the bottom of
the tank. (Fig. 4)
■
Check that the rollers have been pushed
completely into the guides.
■
Fasten the rollers with four accompanying
screws. (Fig. 5)
FILTER ASSEMBLY
■
Insert the foam filter that has been supplied for
wet vacuuming. (see the section called "WET
230V~/50Hz
VACUUM CLEANING")
1400W
■
Insert the dust bag that has been supplied for dry
3600W
vacuuming. (see the section called "DRY
30 l Plastic
VACUUM CLEANING")
35 mm Ø
■
Replace the upper section on the tank. (Fig. 6)
paper bag
■
Align the upper section with the clamps.
foam filter
(Fig.7)
■
Hook the clamps into the upper section and
let them snap into place by pressing the clamps
downwards.
■
Place the large end of the hose on the front air
intake stub on the tank. (Fig. 8)
■
Select a nozzle or the wand and slide it over the
vacuum hose. (Fig. 9)
■
After using and cleaning the appliance, store the
accessories
corresponding holders on the vacuum cleaner.
(Fig. 10)
3
by attaching them to the