Download Print this page

Advertisement

Quick Links

RACWDV40
WET AND DRY VACUUM CLEANER
OWNER'S OPERATING MANUAL

Advertisement

loading

Summary of Contents for Ryobi RACWDV40

  • Page 1 RACWDV40 WET AND DRY VACUUM CLEANER OWNER’S OPERATING MANUAL...
  • Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications...
  • Page 3 DESCRIPTION Components list 1. Telescopic Wand 16. Safety float valve 2. Floor tool 17. Cartridge filter cap 3. Crevice tool 18. H13 HEPA Cartridge filter 4. Round brush 19. ON/OFF switch 5. Hose set 20. Connection for the vacuum hose 6.
  • Page 4 DESCRIPTION height adjustment button suction adjustment button Please refer to pages 2 - 4 for instructions...
  • Page 5 DESCRIPTION Please refer to pages 2 - 4 for instructions...
  • Page 6 DESCRIPTION Filter Self-Cleaning System press 3-4 times Scan Here for Demonstration of How To Use Filter Self-Cleaning System Please refer to pages 2 - 4 for instructions...
  • Page 7 DESCRIPTION Please refer to pages 2 - 4 for instructions...
  • Page 8 Don’t vacuum up liquids that are hotter than 60°C or any GENERAL POWER TOOL SAFETY WARNINGS poisonous or flammable dusts. Never lay the appliance on its side. Pay particular WARNING! attention to a horizontal position and adequate stability This appliance complies with the compulsory safety on stairs.
  • Page 9 Do not use blower as a sprayer in wet mode. Wear a dust mask and protective eye wear. SPECIFICATIONS WARNING Model No.: RACWDV40 Always switch off and unplug the machine from the Supply voltage: 220-240V ~ 50Hz electrical outlet before assembling, opening, emptying...
  • Page 10: Operation

    VACUUMING ASSEMBLY WARNING Ensure that you read, understand, and apply the safety instructions. Reminder: DO NOT vacuum hazardous substances. Turn the tank upside down and insert the two caster feet into the front slots on the base. Apply downward pressure to each caster.
  • Page 11: Environmental Protection

    FILTER SELF-CLEANING SYSTEM Cleaning Foam Filter Connect to the hose which has to insert to the vacuum Carefully remove foam filter. cleaner to make this system work. Use a mild soap and water solution to wash foam filter Insert the power plug. Move the on/off switch to the and rinse with clean water, and air dry before next use.
  • Page 12: Troubleshooting

    TROUBLE SHOOTING WARNING To reduce the risk of personal injury, unplug the cleaner before performing maintenance/troubleshooting checks. Problem Cause Solution The appliance doesn’t work Check the power supply. No power Check Overload Protection switch. Check if switch is in position II without appliance plugged in Functional fault in the power cord, switch, Have the damaged part checked by...
  • Page 16 Techtronic Industries (Australia) Pty. Ltd. 31Gilby Road, Mt. Waverley, VIC 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand...