3. Installation
3.1. What's in the box?
BMV-700 head unit together with attachment
sleeve.
500A shunt.
1.5m (59") red cable with a 1A fuse.
10m (33ft) RJ12 UTP cable.
Square face plate together with an attachment
flange.
Bag with 4 small screws.
Quick installation guide.
Spare serial number sticker.
3.2. Mounting the shunt
The shunt has an IP21 rating; this means that the shunt is not waterproof and has to be mounted in a dry location.
The shunt has two 5.5 mm holes for mounting purposes; these are located in the base of the shunt. The holes can be used to
screw or bolt the shunt onto a hard surface (note that these screws are not included).
For the exact location of the mounting holes see the
Page 4
Manual - BMV-700
dimension drawing [42]
in the appendix of this manual.
Installation