Using The Head Unit Menus; Trends - Victron energy BMV-700 Manual

If the "Time remaining" indicates three dashes: "---" this means that the battery monitor is in an unsynchronised state. This
occurs when the battery monitor has just been installed or after it has been left unpowered and is powered up again. For more
information, see see the Synchronising the battery monitor [19]

5.3. Using the head unit menus

Alternatively, use the VictronConnect app to access the battery monitor settings. See the chapter
VictronConnect app [11]
When the battery monitor is powered up for the first time or when the factory settings have been restored, the battery monitor will
start the quick setup wizard; see chapter:
battery menu can be accessed as described in this chapter.
The battery monitor is controlled by the four buttons on the head unit. The function of the buttons depends on which mode the
battery monitor is in. This is indicated in the below table.
If the backlight is off, press any button to restore the backlight.
Button Function when in normal mode
Press and hold for two seconds to switch
to setup mode. The display will scroll the
SETUP
number and description of the selected
parameter.
Press to switch to the history menu. Press
SELECT to stop scrolling and show the value. Press
again to switch back to normal mode.
Press and hold both SETUP and SELECT
SETUP and buttons simultaneously for three seconds
SELECT to restore factory settings (disabled when
simultaneously setting 64, lock setup, is on, see
setup
+ Move upwards.
- Move downwards.
Press and hold both buttons
+ and -
simultaneously for three seconds to
simultaneously
manually synchronise the BMV.

5.4. Trends

The VictronConnect app provides battery monitor data logging, but only while the VictronConnect app is connected and
communicating with the battery monitor. It will simultaneously log two of the following parameters:
• Voltage (V).
• Current (A).
• Power (W).
• Consumed Amp Hours (Ah).
• State of charge (%).
Page 16
Manual - BMV-700
chapter.
on how to do this.
Setup wizard [10]. After that, the battery monitor will operate in normal mode, and the
Lock
[31]).
Function when in setup mode
Press SETUP any time to return to the scrolling text,
and press again to return to normal mode. When
pressing SETUP while a parameter is out of range,
the display blinks five times, and the nearest valid
value is displayed.
• Press to stop scrolling after entering the setup
mode with the SETUP button.
• After editing the last digit, press to end editing.
The value is stored automatically. A short beep
indicates confirmation.
• If required, press again to restart editing.
n/a
When not editing, press to move up to the previous
parameter.
When editing, this button will increment the value of
the selected digit.
When not editing, press to move down to the next
parameter.
When editing, this button will decrement the value of
the selected digit.
n/a
The
Operation