M10 Suspension Points: Attachment At Any Angle; M10 Suspension Points - Electro-Voice MTS Installation Manual

MTS High Output Point Source
For fully weatherized (FW) models, always coat fasteners with RTV (silicon sealant) prior to
insertion. Make sure a completely watertight seal is achieved and the threads are completely
coated.
5.2.2

M10 Suspension points: Attachment at any angle

Suspension systems can use the hard points at any angle up to 90° to a maximum WLL of:
Safety factor
8:1
10:1
Warning!
This is the WLL for the hardpoints, not for the attached hardware (for example, eyebolts).
!
Always use attachment hardware with adequate WLL calculated for the resultant force angle.
5.2.3

M10 Suspension points:

Suspension frames constructed so that only shear forces act on the hard points can use the
hard points at any angle in the shear plane to a maximum shear force of:
Safety factor
8:1
10:1
Electro-Voice
WLL (lbs)
300
240
Shear force (lbs)
450
360
Installation manual
Designing an MTS array | en
WLL (kg)
136
109
Shear force (kg)
204.1
163.3
2021-09 | V01 | F.01U.386.524
21