Table of Contents
Advertisement
MTS High Output Point Source
Electro-Voice
1
3
2
2
1
Installation manual
Designing an MTS array | en
DO NOT use a single pick point
suspension system. Use multiple
structural pick points or a single pick
point with a secondary safety. See the
examples that follow.
Use a minimum of two pick points. This
example uses three pick points.
Single pick point suspension must be
installed in conjunction with an
additional secondary safety suspension
capable of supporting the entire load,
with the required safety factor. Refer to
Suspension, page 4 .
2021-09 | V01 | F.01U.386.524
25
Advertisement
Table of Contents
