Electro-Voice MTS Installation Manual page 19

MTS High Output Point Source
Electro-Voice
6.
PH1
7.
1
8.
9.
PH2
The image shows the properly installed gland
nut cover.
Installation manual
Wiring and connections | en
Connect the terminal blocks to the input
connectors, and secure with the (4)
captive screws.
Pull the cable(s) through the gland
nut(s) while you push the plate toward
the input cup until it seats properly and
is flush with the outer flange.
Tighten the gland nuts.
Secure the gland nut cover to the input
cup using the (6) screws.
2021-09 | V01 | F.01U.386.524
19