E-Wheels E2S V2 User Manual page 39

Speed Indication
Unit: KM/H
Speed signals comes from the motor via the controller to the display.
The indicated speed depends on the motor signal and the wheel diameter.
Gear Switch Level
The higher the gear, the higher the speed. Short press the power button twice to switch between the following gears:
• E2S V2: 1 - Eco (Grønn = slow), 2 - Drive (D = medium), 3 - Sport (S = quick).
• E2S V2 Pro: 1 - Eco (Grønn = slow), 2 - Drive (D = medium), 3 - Sport (S = quick).
Lights Control
To turn on both the front- and the rear lights, the scooter must be on and the power button must be short pressed once. The
brake light turns on automatically when braking.
Cruise Control-Function
Cruise control can be regulated in the E-Wheels app (chapter 7). When riding, hold the gas accelerator in wanted speed for 5
second (until your hear a beep) to activate the cruise control. To deactivate the cruise control, press either the brake handle or
the gas accelerator
Start Mode Selection
For safety purposes all E2S models are set by default to non-zero start mode, meaning the motor will not start until you kick
start the scooter and pass the speed of 3km/h.
EN