Clevo NP70PNP Service Manual page 32

Disassembly
4. Carefully lift the keyboard
Figure 4
board ribbon cable
Keyboard Removal
away from the base
8
(cont'd.)
5. Carefully lift the keyboard
c. Lift the keyboard up and
disconnect the keyboard
c.
ribbon cable from the
locking collar socket.
d. Remove the keyboard.
d.

Re-inserting the Key-
board
When re-inserting the
keyboard firstly, align the
keyboard tabs at the bot-
tom of the keyboard with
the slots in the case.

6. Keyboard
2 - 8 Removing the Keyboard
up, being careful not to bend the keyboard ribbon cable
6
from the locking collar socket by using a flat-head screwdriver to pry the locking collar pins
7
(Figure 4c).
off the computer (Figure
6
7
6
8
8
7
6
7
4d).
. Disconnect the key-