Table of Contents
Advertisement
Getting Started
On the Main Menu, press q to select 3. User Settings, and then press
4.
On the User Settings menu, press q to select 6. Wireless speaker, and then
5.
press
.
6.
On the Wireless Speaker menu, with 1. Register selected, press
The screen displays "Registering..."
•
If registration is successful, the screen displays "Registration succeeded."
The base unit plays a confirmation tone. The registered speakerphone LEDs
stop flashing red and green. The LEDs turn green briefly, and then turn off.
•
If registration fails, the screen displays "Registration failed."
•
To cancel registration, press
7.
To register an additional C52-SP speakerphone, follow the instructions in
"Register the wireless speakerphone" on page 6.
You can register up to three C52-SP units to a C520.
Manually register the C52-SP to a A230
1.
Press and hold the REGISTRATION button on the bottom of the C52-SP
speakerphone for five seconds.
When you release the button, the C52-SP LEDs will flash red and green
alternatingly. This indicates the C52-SP is ready for registration.
2.
Press the key on the A230 for 4 seconds.
The red LED on the A230 double-flashes rapidly and turns off when the
registration has been successful. The LEDs on the C52-SP briefly turn green and
then turn off while the red Power LED turns on.
.
7
.
Advertisement
Table of Contents
