Table of Contents
Advertisement
Technical Specifications
Frequency control
Transmit frequency
Channels
Nominal effective
range
Power requirements
Troubleshooting
If you have difficulty with your product, please try the suggestions below.
For customer service, visit our website at snomamericas.com .
My speakerphone does not work at all.
•
Make sure the speakerphone charger power adapter is securely plugged into an
electrical outlet (see "Connecting power to the C52-SP" on page 5). The POWER
light should be on.
•
Make sure the speakerphone is registered to the base (see "Register the wireless
speakerphone" on page 6).
•
Other electronic products such as HAM radios and other DECT phones can cause
interference with your cordless phone. Try installing your phone as far away as
possible from these types of electronic devices.
•
If the speakerphone battery is completely depleted, it may take up to 15 minutes
to charge the speakerphone before the speakerphone has enough charge to use
for a short time.
•
The speakerphone battery may be defective. Contact our customer service for
assistance.
I cannot dial out.
•
You must use a telephone on the same line to dial out. Once you have dialed the
number, you can press
•
If other telephones in your home are having the same problem, the problem is
in your wiring or telephone service. Contact your telephone service provider
(charges may apply).
Crystal controlled PLL synthesizer
1921.536 – 1928.448 MHz
5
Maximum power allowed by FCC and IC. Actual operating range
may vary according to environmental coditions at the time of
use.
Ni-MH Battery Pack; 7.2V; 2100mAH rechargeable battery
Base unit adapter: Input: 100–240V AC 50/60Hz, 500mA
on the speakerphone to take the call.
Output: 12V DC @ 1.0A
11
Advertisement
Table of Contents
