Page 3
USE AS NOTED ABOVE. SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, STRONG declares that the devices 32HD5553, 40FD5553, 43UD7553, 50UD7553, 55UD7553 are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc Subject to alterations.
1. INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.
the carton during the warranty period, to keep your device perfectly protected in the event of repair or warranty. 1.3 Accessories 1x installation instructions 1x Safety Instructions/Warranty Cards 2x remote controls* 2x AA batteries 2x AAA batteries * It is possible to pair only one Remote Control, however the second remote control can still be used in the traditional way without a Bluetooth connection as the first one.
NOTE: The graphics are for representation only. 1. Power indicator /remote sensor 2. Speakers 2.3 Rear panel Fig. 3a NOTE: The graphics are for representation only. 32FD5553 1. LAN Connect to your Internet router to access the internet/apps. 2. HDMI 2 Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.
Page 8
40FD5553 COMMON DIGITAL ANT2 ANT1 SATELLITE AUDIO OUT INTERFACE (CI) HDMI1(ARC/CEC) USB 2.0 500mA) 13/18V 13/18V 400mA 400mA USB 2.0 500mA) HDMI3(CEC) HDMI2(CEC) 1. HDMI 1 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplifier that supports the ARC function.
4. S/PDIF (optical) Use an optical cable to connect your TV to a compatible digital amplifier or Home theatre set. 5. CI Insert a Conditional Access Module (CAM). 6. Mini AV IN To connect your video camera or other device using 3.5 mm AV cable to your TV to play videos on your TV screen.
Page 10
Fig. 4a 1. q Press to turn the TV on or standby. 2. ! Press to mute or restore the volume. 3. Navigate the menu. 4. OK Confirm the selection. 5. Press to go back to previously viewed channel. In menu: Back to previous menu. Enter the home desktop.
Page 11
Fig. 4b Second RCU is quite big and traditional. It is only IR and has complete list of buttons to control your TV. 1. q Press to turn the TV on or standby. 2. ! Press to mute or restore the volume. 3.
Press to activate the voice control function. Press to access the TV sources. 19. P +/- Change programmes up or down. Press to access the teletext in TV mode. 21. USB Enter the Multimedia menu. Audio track selection 23. SUBT Enable/disable subtitles in DTV mode 24.
• Do not place the remote control under direct sunlight which will cause deformation of the unit by heat. • When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV's position, or operate the remote control closer to the remote sensor.
Page 14
Note: If you plan to use smaller RCU for TV control, we recommend to make pairing of it with your TV. This will allow using extended features of it. Pairing screen appear after the country and language selection during the First Time Installation. Follow simple on-screen instructions for this. If you miss this screen, it is possible to make pairing later in Settings chapter of menu or by pressing key on RCU at first time of it usage.
Step 6 Tuner Mode Please select Antenna your tuner mode: Cable Satellite To install channels for terrestrial, satellite or cable broadcasting please select Antenna, Cable or Satellite and choose required type of channels Digital, Analogue. 3.1 Channel installations for cable Tuner Mode Please select Antenna...
Page 16
Channel scan First, please connect the cable. Digital and analog channels Star the channel scan now? If you skip this step, Only analogue channels the channel scan could be performed in Menu. Only digital channels Skip scan First step is to connect the cable. Then you must start the channel scan. You can choose between digital and analogue channels, only analogue channels or only digital channels.
3.2 Channel installations for Antenna Tuner Mode Please select Antenna your tuner mode: Cable Satellite Select the tuner mode Antenna and press OK to continue. Scan direc on Select the channel ordering method. Automa c Automa c Channel Ordering channel ordering is the default method. Pay TV ordering enable user presenta on of channel Pay TV Ordering numbers in a convenient form dedicated to Pay...
In the next step, the channel search is started and takes a few minutes. Scanning Analog Channels: 0 The channel scan Digital Channels: 0 may take a while to complete. Progress: 7% 3.3 Channel installations for Satellite Tuner Mode Please select Antenna your tuner mode: Cable...
Page 19
Antenna type Next More By selecting Next you go to the Select the Operator page, while by selecting More you access the Satellite antenna type page if it is necessary to set the DiSEqC or Unicable. Single Satellite Tone Burst antenna type DiSEqC 1.0 DiSEqC 1.1...
With you can select the satellite (or satellites) to which your dish is addressed. Press OK to access the submenu that allows you to activate or deactivate the selected satellite and to set its various parameters. After all settings have been made, select 8 to continue. NOTE: To configure the DiSEqC or Unicable parameters it is necessary to select MORE in the previous steps.
Search movies, TV, and more 6:28 Apps YouTube Customise channels To access Ho me screen and exit from any active application, press button on the remote control unit (RCU). Use and to move around and OK to enter the option or application. 4.1 Inputs TV has such possible inputs or sources: ATV, ANTENNA, CABLE or SATELLITE for respective live TV installed channels preview or HDMI 1, HDMI 2, HDMI 3 and AV to select connection from external devices.
Page 22
Network & Internet Search Home Discover Apps Network privacy policy Wi-Fi Available networks XXXX Connected 12345 Your TV can be connected to your home network in two ways: • Wired, using the RJ-45 (LAN) connector on the back panel. • Wireless, using the internal wireless and your home wireless network. NOTE: To access the Internet, you must subscribe to a highspeed broadband Internet service with your Internet service provider.
To connect to a wired network 1. Ensure you have: - An Ethernet cable long enough to reach your TV - A router or modem with an available Ethernet port - A highspeed Internet connection 2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV. 3.
5.1 Channel installation If the channels were not tuned during the first installation, it is still possible to do so later, by accessing the LIVE TV application available on the HOME screen. First of all you need to select the correct source to scan to get the channels you intend to install by pressing the button and selecting a source.
EPG stands for Digital Electronic Program Guide. It is supplied by the programme providers and offers information about broadcasted programmes. You can access it in digital mode by pressing on the remote control or through TV options with + button in Channels chapter. Select Program Guide icon to get into EPG.
- 2nd TV options level TV options contains such items: Input, Picture, Sound, Power, CI Card, Advanced Options and Settings. TV op ons Inputs Picture Sound Inputs allows you to select the source to be displayed. The available sources are: - Antenna: to enable the display of channels from the digital terrestrial signal.
NOTE: Using of smart functionality of your TV require connection to internet and, in most cases, using your Google account. Please refer to Chapter 3 and Chapter 7 for information how to setup internet connection and enter to Google account. Using Google account give you access to applications and games, movie and music market of Google Play Store.
1. Some USB storage devices may not be compatible to operate smoothly with this TV. 2. Back up all the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer's responsibility.
Page 29
Search Home Discover Apps With Smart Player you can reproduce video, audio or picture files of supported formats from your USB storage devices on your TV screen. Note: If, for any reason, you do not want to use built-in Smart Player application, you could enter to Google Play Store and install any of available media players (i.e.
8.2.1 Play videos Select Video from Multimedia type selection and choose file for playback. 007-Skyfall 00:03 Pause Menu Playlist 00:46 Additional useful keys: OK to play or pause the playback. for rewind backward/forward the file. to access the Menu. ...
8.2.2 Browse photos Select Photo from Multimedia type selection and choose the file from which the slideshow has to start the playback. Press experience more content Firenze 1 (4204x2797).jpg 16/64 To get access to control playback during playback press OK button to display the menu or button to display more content.
Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively, you can send a support mail via our website www.strong.tv. Problem...
Page 33
Satellite dish is too small, trees or buildings in path. Change to a larger dish or change position of dish. d) Signal is too strong, dish is oversized. Connect a signal attenuator to the LNB input. Ask a local satellite specialist for advice.
10. SPECIFICATIONS Audio Audio Output: 32”/40”: 2 x 8 W 43”/50”/55”: 2 x 10 W Video Channel coverage: DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz DVB-C: 113-858 MHz DVB-S2: 950 MHz-2150 MHz System: DTV: DVB-T2, DVB-S2, DVB-C ATV: PAL/SECAM (BG/DK/1) AV: PAL, NTSC, SECAM Connectors 32”/40”...
Page 35
55”: 12.2 Kg Data Protection: Please be aware that STRONG, its manufacturing partners, the application providers and the providers of the services may collect and use technical data and related information, including but not limited to technical information about this device, system and application software and peripherals. STRONG, its manufacturing...