Strong SRT 32HC4432 User Manual

Hd smart android tv with dvb-t2/c

Advertisement

Quick Links

HD SMART Android TV with DVB-T2/C
32HC4432
User Manual
Manuel utilisateur

Advertisement

Table of Contents
loading

Summary of Contents for Strong SRT 32HC4432

  • Page 1 HD SMART Android TV with DVB-T2/C 32HC4432 User Manual Manuel utilisateur...
  • Page 4 Supplied by STRONG Austria Represented by STRONG Ges.m.b.H. Teinfaltstraße 8/4.Stock A-1010 Vienna, Austria Email: support_at@strong.tv 15 Dec 2020 10:10...
  • Page 5 Hereby, STRONG declares that the device SRT 32HC4432 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
  • Page 6: Table Of Contents

    To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference. TABLE OF CONTENTS 1.0 INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Accessories 1.4 Equipment set-up 2.0 INSTALLATION 2.1 Default PIN code: Access to the LiveTV app to set parental control 2.2 Front panel 2.3 Rear panel 2.4 Remote controls...
  • Page 7: Instruction

    1.0 INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. Only use attachments/accessories specified or provided by the manufacturer (such as the „ exclusive supply adapter, battery etc.). Please refer to the information on the exterior back enclosure for electrical and safety „...
  • Page 8: Storage

    WEEE Directive Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
  • Page 9: Rear Panel

    NOTE: The graphics are for representation only. 1. Power indicator /remote sensor 2. Speakers 2.3 Rear panel Fig. 3a NOTE: The graphics are for representation only. 1. pq Scans up/down through the channel list. Within the menu system, the buttons operate with equal function of the pq buttons on the remote and adjust menu controls.
  • Page 10: Remote Controls

    NOTE: If the TV turns off when you plug a cable to any connector, just turn it on again. 2.4 Remote controls Fig. 4 1. q Press to turn the TV on or standby. 2. INPUT Press to select the different input signal sources 3.
  • Page 11: Using The Remote Control

    Do not place the remote control under direct sunlight which will cause deformation of the unit „ by heat. When the remote sensor is under direct sunlight or strong lighting, the remote control will not „ work. If so, please change the lighting or TV's position, or operate the remote control closer to the remote sensor.
  • Page 12 Select your preferred Tuner: Mode Antenna/Cable. To install channels for terrestrial or cable broadcasting please select Antenna/Cable and choose required type. It is possible to skip scanning and perform it later. To complete installation follow the instruction on the screen. Congratulations! You have successfully completed the First time installation of your TV.
  • Page 13: Home Screen

    4.0 HOME SCREEN The Home screen is the main screen of this model of TV. It divided on few zones and lines and contains Search line with possibility to enter text to search information or content, related with this text; „...
  • Page 14: Network & Internet

    4.2 Network & internet Connection to internet allows to install and use internet applications (i.e. Youtube, Netflix, etc.) and to enjoy of other advantages of Smart TV. Access to the part for network and internet connection is through chapter Network & internet of Settings menu or through quick access panel on Home screen.
  • Page 15: Live Tv Usage

    To connect to a wired network 1. Ensure you have: An Ethernet cable long enough to reach your TV „ A router or modem with an available Ethernet port „ A highspeed Internet connection „ 2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV. 3.
  • Page 16: Channel Installation

    This application gives you access to live TV to watch and enjoy your favorite TV and radio programs from TV sources (Aerial/Antenna, Cable) of your choice. In case if you skipped DTV installation during FTI and enter application for the first time, application will recommend to perform channel scanning and installation.
  • Page 17 For Tuner(DTV) source will start same procedure of channel installation, as for FTI. Select Tuner Mode Antenna/Cable and fallow instructions on screen. For more details please refer to Chapter 3. For Tuner(ATV) source system start scanning for analog or cable TV channels from connected antenna. It is possible to skip scanning - just select Skip Scan item.
  • Page 18 After installation of new channels completed, confirm finish of it with FINISH item. Select Done on source screen to exit from procedure. Way 2 - through Settings menu from Channel chapter This is more universal procedure to add channels. Here also possible to defile more options for channels.
  • Page 19: Watching Tv Channels

    Channel Installation Mode This chapter is for selecting source for channel installation and performed. Available options are Antenna or Cable. Other options and items in Channel chapter: - to update channel list automatically in case, if operator change it; Auto Channel Update Channel Update Message - to show message about channel update;...
  • Page 20: Electronic Program Guide (Epg)

    5.3 Electronic Program Guide (EPG) EPG stands for Digital Electronic Program Guide. It is supplied by the programme providers and offers information on broadcasted programmes. You can access it in digital mode by pressing GUIDE on the remote control. Press GUIDE to bring up the EPG interface. Use pq to select channel and t u to see detailed information for program Press BACK to stop and return to viewing modes.
  • Page 21: Smart Tv Possibilities

    Available options and parameters: Sound Tracks – to select sound track, if available from broadcast; Default Channel – to select channel as default after TV switch on; HBBTV Settings – to define parameters of HBB TV support and usage; Auto Sleep – to define period of user's inactivity to switch TV to standby mode; some other parameters for Subtitle, Teletext and other.
  • Page 22: System Settings

    NOTE: Using of smart functionality of your TV require connection to internet and, in most cases, using your Google account. Please refer to Chapter 3 and Chapter 7 for information how to setup internet connection and enter to Google account. Using Google account give you access to applications and games, movie and music market of Google Play Store.
  • Page 23: Device Preferences Menu

    7.2 Device Preferences menu To get access to all device control options, like Date & time, Language, Picture, Sound, etc., please select Device Preferences chapter on this menu. Press MENU to display the main menu. Press p/q to select Device Preferences in the main menu, then press OK to enter the sub-menu.
  • Page 24: Multimedia

    2. Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer's responsibility.
  • Page 25 NOTE: Support (or non-support) of multimedia files depend not only on your TV, but also on application, which will be used for playback. Different multimedia applications could contain built-in abilities to support various formats and types of multimedia files. Connect a USB storage device to the USB port, run Multimedia Player and select the types of media on the Multimedia selection page: Video, Photo, Audio and Text.
  • Page 26: Play Videos

    During playback you could use multimedia buttons on your RCU or use on-screen commands, available from menu by button. NOTE: By choosing one of the media types, for example Video, the folders inside will display only compatible media files and no other files of other types. 8.2.1 Play videos Select icon Video from Multimedia type selection page and select file for playback.
  • Page 27: Browse Photos

    8.2.2 Browse photos Select icon Photo from Multimedia type selection page and select file from which will start slideshow playback. To get access to control playback during playback press to display/exit the menu. Available options: Play/Pause to play or pause the slideshow playback Repeat select repeat mode for slideshow playback Shuffle...
  • Page 28 To get access to control playback during playback press to display/exit the menu. Available options: Play/Pause to play or pause the playback Repeat select repeat mode for playback on/off shuffle for playback Shuffle Show info display detailed information about file Hide Spectrum switch off animation of playback (if available) Lyric Options...
  • Page 29: Browse Text Documents

    Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively, you can send a support mail via our website www. strong.tv.
  • Page 30 Problem Possible cause and solution No colour 1. Change the colour system. 2. Adjust the saturation. 3. Try another channel. Black-white programme may be received. The remote control does 1. Change the batteries. not work 2. The batteries are not installed correctly. 3.
  • Page 31: Specifications

    Again, turn on the TV. plugging a cable into any connector NOTE: If the problem persists after these solutions, please contact your local support centre or send a support mail via our website www.strong.tv. 10.0 SPECIFICATIONS Audio Audio Output: 2 x 8 W...
  • Page 32 3.5 kg (with stand) Data Protection: Please be aware that STRONG, its manufacturing partners, the application providers and the providers of the services may collect and use technical data and related information, including but not limited to technical information about this device, system and application software and peripherals. STRONG,...

Table of Contents