Strong 32HD5553 Manual page 16

First step is to connect the cable. Then you must start the channel scan. You can choose between digital and
analogue channels, only analogue channels or only digital channels. If you skip this step, the channel scan can
be done later by accessing the TV menu. Press OK for your selection.
On the Scan Mode menu you can choose to perform a full scan by selecting Full, while selecting Advance you
can perform a scan using the Frequency and Network ID data provided by your operator. Use the OK button
for setting the value and  to start the channel scan.
In the next step the channel scan started and will take some minutes to complete.
14
Channel scan
First, please connect the cable.
Star the channel scan now?
If you skip this step,
the channel scan could
be performed in Menu.
Cable Scan Configure
Please configure the cable info.
Use "ENTER" key to se ng value
and "RIGHT" key to next page.
Please tune to your country home
max transponder frequency.
Scanning
The channel scan
may take a while
to complete.
Digital and analog channels
Only analogue channels
Only digital channels
Skip scan
Scan mode
Advance
Channel Scan Type
Only digital channels
Frequency (KHz)
474000
Network ID
5555
Analog Channels: 0
Digital Channels: 0
Progress: 7%