Table of Contents
Advertisement
Important Information
Warnings
Read and follow all instructions before using
this appliance to prevent the potential risk of
fire, electric shock, personal injury, or damage
to the appliance as a result of improper usage
of the appliance. Use appliance only for its
intended purpose as described in this manual.
To ensure proper and safe operation: appliance
must be properly installed and grounded by a
qualified technician. DO NOT attempt to adjust,
repair, service, or replace any part of your
appliance unless it is specifically recommended
in this manual. All other servicing should be
referred to a qualified servicer.
Make sure that incoming voltage is the same
as unit rating. An electric rating plate specifying
voltage, frequency, wattage, amperage, and
phase is attached to the product.
Electrical Requirements
Assure that the electrical installation is
adequate and in conformance with the National
Electrical Code, ANSI/NFPA 70-latest edition
or Canadian Electrical Code C22.1-1998 and
C22.2 No. 0-M91 (or latest edition), and all
local codes and ordinances. A 115 volt, 60-Hz,
15 amp, fused, electrical supply is required. It
is required that a separate circuit serving only
this appliance be provided. This appliance is
equipped with a power supply cord having a
4-prong grounding plug.
To minimize possible shock hazard, the cord
must be plugged into a mating 3-prong,
grounding-type wall receptacle. DO NOT use
an extension cord.
C
©2015 Viking Range, LLC
Advertisement
Table of Contents
