Performing A Test Cut - Lincoln Electric Vernon Tool MasterPipe Compact Profiler Operator's Manual

Performing a Test Cut

The MasterPipe Compact Profiler ships with two factory test cut pieces.
The first test cut piece is a 3" Schedule 40 pipe: 45° saddle feature on one end, and a straight cut on the other. The
second cut is a 3" Schedule 40 pipe weld coupon: 3" overall length with a 38.5° bevel on both ends.
° Beveled Weld Coupon
45 Saddle Coupon
It is recommended that you cut each of these sample programs to verify it's operation against the factory cuts, and
ensure that the machine is operating to factory specifications.
MATERIAL REQUIRED:
Minimum of 12" long, 3" Schedule 40 pipe
Select the job.
To open the factory test cut, press the SELECT JOB button.
User Guide Page 26