Specifications - Makita DTR181 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Tie wire (Optional accessory)
Approximate number of ties
per reel
Overall length
Rated voltage
Net weight
*1
Available only when an optional wire guide B complete (EG) is installed in the arm.
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Combination of rebars that can be tied
Combination of 2 rebars
* The combination is not designed for high tying strength.
Annealing iron tie wire
Poly coated tie wire
*1
Galvanized tie wire
Annealing iron tie wire
Poly coated tie wire
*1
Galvanized tie wire
#4 (13 mm)
#5 (16 mm)
#6 (19 mm)
#7 (22 mm)
#8 (25 mm)
#9 (29 mm)
#10 (32 mm)
#11 (35 mm)
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
#4 (13 mm) #5 (16 mm)
*
*
12 ENGLISH
DTR181
ø0.8 mm
ø0.9 mm
ø0.8 mm
Approximately 75 ties
Approximately 65 ties
Approximately 75 ties
317 mm
D.C. 18 V
2.4 - 2.7 kg
DC18SH / DC18WC
#6 (19 mm)
- -
-
-
- -
#7 (22 mm)
-
-
-
-
-
-