Table of Contents
Advertisement
MAN1813-9
8.3 EIS Control Panel
Figure 6: EIS Keypad
8.3.1 WIP Select Switch
(One switch per WIP) - when pressed for the first time will initiate a call to the WIP, or answer a call
from a WIP. Pressing the switch a second time will terminate the call to the WIP regardless of who
initiated the call.
8.3.2 WIP Select Indicator (Red)
(One indicator per WIP) - will flash when the ECP is calling the WIP and goes steady when the call is
answered at the WIP. When the call is terminated, the indicator switches off. The indicator also flashes
when the ECP is being called from a WIP and goes steady when the call is answered at the ECP.
8.3.3 WIP Call Buzzer
Sounds when the ECP is being called from the WIP. Buzzer switches off when the handset is picked up
or the call is terminated.
8.3.4 Zone Cleared Switch
(One switch per evacuation zone) - when pressed for the first time will cause the Green ZONE CLEARED
indicator to illuminate. Pressing the switch a second time will switch off the indicator. To function the
MECP handset must be lifted first.
8.3.5 WIP Fault Indicator (Amber)
(One indicator per WIP) - indicator flashes when a fault associated with the WIP has been detected.
Indicator goes steady upon acknowledgment.
13
Advertisement
Table of Contents
