Hardware Description; Bottom View; Luces Led - Ubiquiti PBE-5AC-620 Quick Start Manual

hardware description

bottom view

Ethernet
The Gigabit Ethernet port is used to connect power and must be
connected to the LAN and DHCP server.
reset button
To restore factory defaults, press and hold the reset button for more than 10
seconds while the device is turned on. You can also remotely reset the device
using the reset button on the bottom of the Gigabit PoE adapter.
release button
After mounting the PowerBeam, check the release button; it should be fully
engaged in the button hole on the back cover. In this way, you will ensure that
the power horn is well located and fixed. If you need to remove the power
horn, please press the release button first.

Luces LED