fantastic furniture Coda Quick Start Manual page 12

Step 14
You will need
2 x Restraint 2 x Screws
Straps (H10) (H11)
4 x Brackets Phillips Head
(H12) Screwdriver
Screw and Wall Plug are not
provided. Please use
appropriate fixtures for
your wall.
Two People
Required
Carefully turn the bookcase over to an upright position.
Attach 2 x Brackets (H12) securely to back of Top panel (P1)
with 2 x Screws (H11) through the smaller hole.
Align the opposite wall Bracket about 20mm lower than the one attached to the bookcase
so the Bracket can't be seen.
Using appropriate wall connection fixtures, secure the Bracket to the wall
and thread the Restraint Strap through it.
Be careful not to over tighten the strap which would cause the unit to lean.
fantasticfurniture.com.au
We strongly advise that you use
the wall safety strap provided to
prevent the unit toppling
(P1)
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
H12
Wall
H11
Screw
Wall
H10
Wall
H12
H12
Page 12