KTM 450 EXC-F 2020 Setup Instructions page 9

Info
The markings on the handlebar should be at the
center of the handlebar clamps.
Keep the installed gap widths equal when tighten-
ing.
(All EU models)
–
Position the controls on the right half of the handlebar.
S03665-01
(500 EXC‑F US, 500 EXC‑F Six Days US)
–
Position the controls on the right half of the handlebar.
E01235-01
(XCF‑W)
–
Position the controls on the right half of the handlebar.
S03667-01
(All EU models)
–
Position the controls on the left handlebar half.
S01423-01
SETUP 2
7