KTM 450 EXC-F 2020 Setup Instructions page 35

3.20 Removing the rear left side cover
3.21 Installing the rear left side cover
3.22 Installing the engine guard (XCF‑W, EXC‑F Six Days)
–
Remove screw
V01870-10
–
Position side cover and hook it in in areas
–
Mount and tighten screw
Guideline
Screw, sub-
frame top
V01879-10
–
Attach the engine guard on the frame at the rear and swing up
at the front.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
H01638-10
1
and take off fairing part to the front.
A
1
.
M8 35 Nm (25.8 lbf ft)
1
.
M6 10 Nm (7.4 lbf ft)
WORK 3
B C
, and .
Loctite ® 2701™
33