2 SETUP
18
–
Mount the washer and splint
V01877-10
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount and tighten screw
V01880-10
Guideline
Screw, frame protec-
tor
–
Mount the cable ties.
(XCF‑W, EXC‑F Six Days)
–
Install the engine guard. (
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Attach the stickers included in the scope of supply (optional).
–
Set the kilometers or miles. (
–
Set the combination instrument. (
–
Set the clock. (
–
Refuel. (
p. 35)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
co
.
cp
with the washers.
M5
3 Nm (2.2 lbf ft)
cq
.
M5
3 Nm (2.2 lbf ft)
p. 33)
p. 36)
p. 36)
p. 37)