3.14
Connecting the negative cable of the 12-V battery
3.15
Removing the 12-V battery
Warning
Risk of injury 12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of 12 V batteries with less than the minimum voltage correctly.
Main work
–
Connect negative cable
Guideline
Screw, battery termi-
nal
Contact disk
3
cable lug
T02638-10
Finishing work
–
Mount the seat. (
1 m (3 ft)
9 V
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
(500 EXC‑F US, 500 EXC‑F Six Days US)
–
Turn the ignition key in the ignition lock to the position
while the engine is idling.
–
Remove the seat. (
1
of the 12-V battery.
M5
2.5 Nm
(1.84 lbf ft)
A
must be mounted under screw
with the claws toward the battery terminal.
p. 26)
while the engine is
p. 25)
WORK 3
2
and
27