Hako system maintenance III/S (every 1000 hours/safety check): Performance by an expert of an authorised Hako workshop by reference to the machine-specific system maintenance at least once a year. Performance of all legally stipulated safety-relevant tests according to the BGV specifications.
Maintenance certificate Maintenance certificate Handover Hako system maintenance I Hako system maintenance II 250 operating hours 500 operating hours Equipment Workshop stamp Workshop stamp Trial run Handover to customer Instruction performed on: performed on: performed on: at _______________ operating hours...
Page 4
Hako system maintenance Hako system maintenance Hako system maintenance I (every 250 hours) Battery and charger Check the battery and the charger Check the cables and plug connections of the battery and the charger for ease of movement, wear and corrosion ...
Page 5
Hako system maintenance Rotating brush unit and side wiper Check proper raising, lowering and proper functioning of the pressure reinforcement Check the brush decoupling and coupling function Check the condition and proper functioning of the driver of the rotating brushes, replace if necessary ...
Page 6
Check the optical condition of the machine (corrosion and labels) Trial run and function test Hako system maintenance II: Every 500 hours All maintenance work according to Hako system maintenance I Check the following electrical output: Drive motor Brush motors ...
Page 7
Trial run and function test Hako system maintenance III/S (safety check) Every 1000 hours, at least once a year All maintenance work according to Hako system maintenance II Replace the backup battery of the electrical control and set a real-time clock ...
Page 8
Hako GmbH Head Office Hamburger Str. 209-239 23843 Bad Oldesloe Germany Tel. +49 4531 806-0 info@hako.com www.hako.com...