Philips AquaTrio Cordless 9000 Series Manual page 33

Cleaning the motor inlet filter
9 Put the filter case including the foam filter back into the dust bucket.
Caution: Make sure the white material of the filter case lid is facing up.
Caution: Make sure that the filter case including the foam filter are
completely dry before you put them back into the dust bucket.
10 Reconnect the 3-in-1 handheld to the dust bucket.
Caution: Do not reconnect the 3-in-1 handheld to the dust bucket
without the filter case being inserted in the dust bucket.
Note: Replace the filter every 6 months to ensure maximum performance.
Replacement filters are available under part number XV1791 (see
'Replacement').
The 3-in-1 handheld has a filter that may become blocked with dust. This can
reduce the suction power over time. To clean the motor inlet filter, follow these
steps:
1 Press the release button (1) to release the 3-in-1 handheld of the dust bucket
and then lift the 3-in-1 handheld off the appliance (2).
English
35