Philips AquaTrio Cordless 9000 Series Manual page 25

Removing blockages from the Vacuum & Mop set-up
Clearing blockages from the wet module
Tip: In case a microfiber brush is difficult to remove, you can use the
cleaning brush handle to unlock the microfiber brush.
2 You can remove entangled hair or threads from the microfiber brushes by
sliding down the microfiber brushes with one hand.
Tip: You can also use a pair of scissors to cut hairs and threads that have
become entangled around the microfiber brushes.
The Vacuum & Mop set-up may become clogged. You may notice this when
more water gets on the floor than usual or when bigger dirt particles are no
longer sucked up and fall back on the floor. Below you can find the instructions
to remove blockages from different parts of the Vacuum & Mop set-up.
If there is a blockage in the wet module, first switch off the appliance and
remove the AquaSpin nozzle and the 3-in-1 handheld. Then remove the
blockage by moving the cleaning brush in the suction channel of the wet
module up and down.
English
27