Philips AquaTrio Cordless 9000 Series Manual page 26

English
28
Clearing blockages from the AquaSpin nozzle
Clearing blockages from the wetting strips of the AquaSpin
nozzle
If there is a blockage in the AquaSpin nozzle, it can be removed by moving the
cleaning brush up and down in the suction channel of the AquaSpin nozzle.
After long and frequent use of the appliance, the wetting strips of the AquaSpin
nozzle may become clogged at some point. Follow the steps below to clear the
blockage of the wetting strips of the AquaSpin nozzle.
1 Remove the wetting strip covers from the AquaSpin nozzle by moving them
sideways.
2 Remove the wetting strips from the AquaSpin nozzle by pulling them out
sideways.
3 Rinse the wetting strips under the tap.