Table of Contents
Advertisement
Quick Links
FD35EV SLIDING DOOR SYSTEM Installation Manual
One-Way Soft Close, Recessed Mount Roller
Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
This is a parts set for a sliding door system for residential &
●
commercial use.
T he door closes in 2 soft motion steps.
●
The door can be installed without the use of tools.
●
SPECIFICATIONS
Door Height
Door width
Min. Door thickness
Max. Door weight
Vertical adjustment
Depth adjustment
・ The closing speed of the soft closing type door may change depending on
the ambient temperature, operating method or installation quality.
・Recommended ambient temperature range is 5 to 40 ℃ .
When using a light weight door, you may feel the resistance of
1
※
the soft closer when opening the door.
FOR YOUR SAFETY AND CORRECT INSTALLATION
Meaning of symbols
Warning
Prohibited
Caution
WARNING:
If not followed, death or serious injury may result.
may fall and cause injury.
Do not disassemble or modify any parts other than those described in this document.
Caution:
If not followed injury or damage may result.
frame or door may cause failure.
If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or
scraps and remove these.
Please inform the end user how to use the product safely.
every year is recommended).
Max.2400 mm
2401 - 2700 mm
520 - 1200 mm
700 - 1200 mm
24 mm
35 kg ※
1
/ door
3 mm upward, 4 mm downward
±2 mm
Required
Part No.FD35EVHCP
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lamp FD35EV
Summary of Contents for Lamp FD35EV
- Page 1 FD35EV SLIDING DOOR SYSTEM Installation Manual One-Way Soft Close, Recessed Mount Roller Part No.FD35EVHCP Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand for future reference.
- Page 2 Name for soft-closing for soft-closing standard sliding standard sliding Soft closer Upper roller Upper catch (surface mount) (recessed mount) (surface mount) (recessed mount) Item No. FD35EV-TRM-SC FD35EV-TRH-SC FD35EV-TRM FD35EV-TRH FD35EV-WRH-SC FD35EV-WRH FD30-HTST Trigger Trigger Item Without nut 右 左 下...
- Page 3 CAUTION If the trigger position is wrong, pull back the trigger VIDEO LINK round bar. Roller Trigger catcher (Red colored part) Correct set position Trigger catcher (Red colored part) Improper set position ４ Inserting Parts into Upper Track ⑤Upper catch ④Upper roller Insert the parts in order from ❶ to with...
- Page 4 Hanging Door ❶ Place a 10 mm support under the door. ❷ While holding the door, place the groove under the door CAUTION Verify that the main unit is not dislocated from the casing, either of the door ends. CLICK Casing ❷ Lever Main unit 下...
- Page 5 Adjusting, Fastening the Floor Guide If the door movement is not smooth, remove the door, Fasten all 4 screws after the adjustment. Screw 4× 20 (included in ⑥） Adjustment range: ±2 mm Fixing the End Catch Position (Trailing edge) Fix the end catch 3 mm (※ ) from the position where door stops.
- Page 6 APPENDIX 1 How to remove door Use a 10 mm support under the door. Then pull out the upper roller main unit from the door while raising the lever. It will be easier if you slide the hanger bolt with a spanner. CAUTION Be careful not to let the door fall.
- Page 7 Check if the upper track is set horizontally. Using a level gauge, reset the upper track horizontally. If a roller for Two-way soft closer (FD35EV-WRH-N) is installed by mistake, End catch does not work properly. Check if roller is installed correctly.
- Page 8 SUGATSUNE AMERICA, INC Tokyo, JAPAN Shanghai, CHINA California, USA Phone: +81 (0)3 3866 2260 E-mail:export@sugatsune.co.jp Phone: +86 21 3632 1858 E-mail:lamp@sugatsune.com.cn Phone: +1 310 329 6373 E-mail:sales@sugatsune.com SUGATSUNE KOGYO (UK) LTD Guangzhou, CHINA Illinois, USA Reading, UK Phone: +86 20 6639 3552 E-mail:lamp@sugatsune.com.cn...
Need help?
Do you have a question about the FD35EV and is the answer not in the manual?
Questions and answers