Lamp FD50-H Installation Manual

Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
This product is a parts set for an indoor sliding door system for
●
residential & commercial use.
Built in soft closer enables two-way soft closing movement
●
in both directions.
The door can be installed without the use of tools.
●
Max.2400 mm
680‐1500 mm
・ T he closing speed of the soft closing type door may change depending
on the ambient temperature, operating method or installation quality.
・ R ecommended ambient temperature range is 5 to 40 ℃ .

Meaning of symbols

Warning
Caution
may fall and cause injury.
Do not disassemble or modify any parts other than those described in this document.
:If not followed, injury or damage may result.
frame or door may cause failure.
If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or
scraps and remove these.
Please inform the end user how to use the product safely.
every year is recommended).
2401‐2700 mm
800‐1500 mm
24 mm
50 kg / door
3 mm upward, 4 mm downward
± 2 mm
Prohibited Required
When vertical frame is
not used, use a door
stopper.
1