Lamp FD30-F Installation Manual

Thank you very much for selecting FD30-F FOLDING DOOR SYSTEM.
Before starting installation, please read this installation manual
thoroughly to install the door correctly. Improper installation may result
in injury. To prevent such accident, please follow instructions described
in this manual. After installing the door, leave this manual to the owner
so that the owner is able to use this manual to check the door any time.
The door system will be upgraded/improved without announcement, for
change in dimensions or specifications, please confirm with delivered
door system parts.
■FOR YOUR SAFETY WORK AND OPERATION
symbol denotes "warning" and "caution" during work or operation.
denotes the item which should be avoided to keep safety.
item which should be followed to avoid injury. If this item is not followed, injury
may be resulted.
Warning: If this warning is not followed, it may
result in injury or damage.
This folding door system should be installed by experienced person who has
correct knowledge. If the system is not installed correctly, the door will not operate
smoothly, and/or may cause injury.
Do not try to use this product for any other purposes other than originally intended
for. Do not disassemble the components for any modifications. Do not use the
system for applications that are out of specification. Any improper use might result
in accident or injury. We do not take any responsibility for any damage, accident or
injury occurring from an improper use, application or wrong installation.
Avoid opening/closing the door with excessive force. Such operation may cause
trouble.
It is necessary to manufacture the frame with sufficient strength to endure the
weight of door and impact shocks upon opening/closing the door. A frame with
poor strength might result in improper and slower movement of the door. In the
worst case, door might drop down causing injury.
IMPORTANT:
・This manual is prepared to describe the installation methods
considered most safe and effective to set up and install the sliding
door system. The installation procedures or methods can be changed
to meet your working conditions or environments.
・ In this manual, the dimensions are not considering margin of error
or deformation of material. Therefore, please carry out each process
such as cutting, taking care of deformation or other changes.

■ SPECIFICATIONS

FD30-F

■ COMPONENT PARTS

2-door reversible separator
4-door reversible separator
収納部
As optional parts, upper roller cap are offered. Please refer Page 4 for detail.
収納部 収納部
収納部
FD30-F CEILING MOUNT, FOLDING DOOR SYSTEM
Installation Manual
(Slidable folding, Center hinge Door edge recessed mount)
Max. Door width Min. Door thickness
450mm
① ② ③
Upper roller Cover cap Guide pin
右
左
下
上
2 2
収納部 右
左
下
上
2 4
symbol
symbol denotes
5
6
Max. Door height
30mm 2400mm
④ ⑤ ⑥
Pivot insert Jig Upper stopper Bottom stopper Center hinge
2 1 2
4 1 2
8
1
Handle(Optional)
3
9
Max. Door weight
15kg/door
⑦ ⑧
Rail Rail
(Surface mount) (Recessed mount)
Select either type
2 3
Select either type
2 6
Part No.FD30URP
5
7
6
Vertical adjustment
±4mm
⑨
Guide rail Guide rail
(Surface mount) (Recessed mount)
Select either type
Select either type