Advertisement
Step2: Power connection for the I-7530A-MR_A and B.
Connect the +Vs and GND pins of the I-7530A-MR module to the
DC power supply (10~30V
Step3: RS-232 connection
Connect the RS-232 ports of the I-7530A-MR_A and I-7530A-
MR_B to the RS-232 COM1 and COM2 of the PC by using the
attached cable CA-0910 respectively. You can use the attached
cable CA-0910 to do that.
Step4: CAN bus connection
Connect the CAN ports of these two I-7530A-MR modules using
the following architecture. If necessary, you may refer the cable
CA-0910-C for wiring conveniently. Please refer to the following
picture.
I-7530A-MR Modbus RTU to CAN Converter Quick Start User Guide (Version 1.0, May/2011) ------ 3
).
DC
Advertisement
