Advertisement
37. When the ENTER key is pressed, message screen is displayed
in the following. Set the ZOOM switch to the "SERVO".
ZOOM switch
38. When the ENTER key is pressed, automatically starts the zoom
POT adjustment.
39. "LENS DEVICE (ZOOM POT ERROR) DETECT OK" is
displayed, press the ENTER key.
40. When the ENTER key is pressed, recording the adjustment data
and releasing from adjustment mode are performed automatically,
and "FINISHED" is displayed when the process is completed,
then click the [OK] button.
(2) Lens Device2 (S)
• Adjust the MR sensor of focus and zoom.
• Adjust the mechanical end of focus and zoom.
Subject
Operation on Lens side
Shooting Mode of the camera P mode (Program Auto)
Adjusting Method
1. Click the [Lens Device2 (S)] button in the Adjustment and In-
spection.
2. Automatically starts the focus MR adjustment.
3. After the focus MR adjustment is completed, message screen is
displayed in the following.
4. Set the ZOOM switch to the "SERVO", and slide the locking
switch in the direction of the arrow.
ZOOM switch
Zoom rotation direction
select index
Zoom rotation direction
select locking switch
5-31
SELP18110G
Not required
• Zoom ring
• ZOOM switch
• Zoom rotation direction
select locking switch
– Continued on next page –
Advertisement
