2-3-23. TRIPOD PLATE
2 four screws (M2)
Note: Apply the adhesive bond to the tip of screws.
2-3-24. REAR OUTER BLOCK
flexible board
rear (mount) side
front (lens) side
1 tripod plate
B-40
wire
2 three screws (M2)
Note 2: Apply the adhesive bond to the tip of screws.
B-40
1 Align the index and install the rear outer block.
Note 1: Take care so that the flexible board and wire
are not pinched.
index
index
2-40
SELP18110G
rear (mount) side
front (lens) side