Advertisement
2-3-43. FILTER SCREW TUBE BLOCK ASSY, ROD SUPPORT BASE
1 Align the two holes with the two bosses,
and install the filter screw tube block assy.
2-3-44. 1ST DRIP PROOF RUBBER, FRONT ORNAMENTAL RING
1 Install the 1st drip proof rubber while the
white sheet surface is facing front (lens) side.
2 three tapping screws (1.7) (CH)
3 rod support base
4 two hexagon socket bolts (2
front (lens) side
rear (mount) side
hole
8)
boss
2 Rotate the front ornamental ring in the
direction of the arrow, and install it.
2-52E
SELP18110G
hole
boss
front (lens) side
rear (mount) side
Note: Install the front ornamental ring
using the name ring wrench
(95 mm).
name ring wrench (95 mm):
J-6082-786-A
Advertisement
