Advertisement
Note: Follow the disassembly procedure in the numerical order given.
2-2-2. FRONT ORNAMENTAL RING, 1ST DRIP PROOF RUBBER
1 Rotate the front ornamental ring in the
direction of the arrow, and remove it.
2-2-3. ROD SUPPORT BASE, FILTER SCREW TUBE BLOCK ASSY
1 three tapping screws (1.7) (CH)
5 filter screw tube block assy
3 two hexagon socket bolts (2
Note: Remove the front ornamental
ring using the name ring wrench
(95 mm).
name ring wrench (95 mm):
J-6082-786-A
front (lens) side
rear (mount) side
4 rod support base
8)
2 1st drip proof rubber
2 Lift up the filter screw tube block
in the direction of the arrow.
front (lens) side
rear (mount) side
2-5
SELP18110G
Advertisement
