Table of Contents
Advertisement
Installing System / Turn on System
3.4.1. TURN ON SYSTEM
To power the PowerPod 2 system, do the following:
1. Begin by switching all of the batteries to the 'On' position.
Note, the 'On" position is when the indicators are RED.
2. Switch the BMS to the 'On' position.
3. The PowerHub and display should be operational at this point.
4. If the system is DC-coupled, switch on the PV.
5. Switch on the Grid.
Installation Manual
75
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerPod 2 and is the answer not in the manual?