Electriq Power PowerPod 2 Installation Manual page 41

Installing System / Battery
5. Place the first battery in the enclosure and ensure that the stickers
align with the BMS when orientated in the correct position (see
next page). Also, use the sticker on the back of the enclosure as a
guide.
*NOTE - USE INCLUDED TOOTH LOCK WASHERS (10mm)
WHEN SECURING THE BATTERIES AND BMS. Torque Note: 6
mm PE and battery mounting PEMs torque min. 3.3 max. 4.0 Nm
(min. 2.4 max. 3.0 ft lb).
CAUTION: Do not remove the battery terminal safety caps
until the cables are ready to be installed.
Installation Manual
41