Led Behavior During Startup - Emerson RSTi-EP CPE200 Series Quick Start Manual

LED Behavior During Startup

After connecting to the power supply, apply power to the
EPXCPE. The controllers will require several seconds to power up.
Power-up LED Sequence:
1. The CPU's REM IO LED will blink
when the power is applied before turning it off.
2. The RUN LED will turn
3. The OK LED will turn
Figure 8: LED Illumination Sequence
23 RSTi-EP CPE200 Series Controllers Quick Start Guide
GREEN
solid GREEN before turning it off.
solid GREEN and remain on.
GFK-3109B