Measure Ac Voltage "V - VOLTCRAFT VC292 Operating Instructions Manual

12.3 Measure AC voltage "V

Proceed as follows to measure "V/AC" voltages:
1. Switch the DMM on and select
the V measurement mode.
"AC" and "V" will appear on the
display.
For lower voltages up to
Æ
max. 600 mV, select the mV
measurement range.
2. Insert the red lead into the V
socket and the black lead into
the COM socket.
3. Connect the two measuring
probes in parallel to the object
that you want to measure (e.g.
generator or circuit).
The measurement will ap-
Æ
pear on the display.
4. After taking a measurement, remove the leads from the measured object and
switch the DMM off.
The voltage measurement range "V/AC" has an input resistance of ≥10 MΩ.
This (almost entirely) prevents a load on the circuit.
"
75