Control Dial - VOLTCRAFT VC292 Operating Instructions Manual

9.2 Clamp
R
S
T

10 Control dial

Use the control dial to select the measurement mode.
Automatic
torange") is enabled and the range will
be automatically selected.
The measurement ranges must be
Æ
selected manually.
Always start with the largest meas-
Æ
urement range, and then switch to
a smaller range if necessary.
The control dial features a function
button.
Use the SEL/
Æ
has more than one function
To turn the multimeter off, move the control dial to the OFF position. Always turn
the multimeter off when it is not in use.
68
R. Current clamp sensor
S. Adjuster for DC zero calibration
T. Battery compartment (at rear)
U
U. Tangible grip range marking
V
V. Clamp opening lever
W. Operating switch
W
X. Safety connection plug
X
range selection
button to switch to sub-modes when the measuring mode
("Au-