Related Manuals for BWT bestaqua 60
Summary of Contents for BWT bestaqua 60
- Page 1 Installations- og Betjeningsvejledning Quick guide - for quick and simple commissioning BW T bes taqua 60 - 62 Reverse Osmosis Plant...
- Page 2 Floor drain must be available in the immediate vicinity of the RO unit. Water quality The feed water, which is to be treated in the BWT bestaqua 60-62 unit, must be drinking water quality with maximum 500 mg/l TDS. Feed water temperature is Min/Max: 5°C /25 °C. Feed water pressure 3-6 bar.
- Page 3 2. Follow steps below to initiate rinse of membranes with feed water (Note: if BWT bestaqua 60/61/62 HQ models running with soft water - jump to chapter 5.) Note! If tank is full then membrane rinse procedure will stop and go in Service.
- Page 4 Running BWT bestaqua 60 / 61/ 62 HQ with soft water (0 °dH BWT bestaqua 60 / 61 /62 HQ models needs to be set up when using with soft water (from Softening unit or Antiscaling unit). Follow steps below to activate “AUTOMATIC MODE + PRETREATMENT”.
Need help?
Do you have a question about the bestaqua 60 and is the answer not in the manual?
Questions and answers