Advertisement
Quick Links
Product Installation Guidelines
BS Lever Action SBA
PRODUCT CODES:
-
46638
-
-
46642
-
-
46649
-
-
46656
-
-
46664
-
-
46672
-
-
46680
-
SPECIFICATIONS
−
The Galvin Engineering CliniLever
hospitals, aged care facilities, schools and in-home care.
−
®
CliniLever
products provide state of the art features to comply with the latest healthcare guidelines.
−
The main body is made of solid dezincification resistant (DR) brass rod, with a DR brass fixed outlet.
Quick action SBA's include ceramic cartridge components
−
IMPORTANT: All CliniLever
premises in good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without notice.
TOOLS REQUIRED
−
Spanner and hex key
−
Thread tape
© Galvin Engineering Pty Ltd
46714
46722
46726
46730
46748
46755
46763
®
product range is primarily used for hand washing applications in
®
Healthcare taps are tested in accordance with AS/NZS 3718 and leave our
Document Number: 001.00.70.13
Version 1, 4 November 2022, Page 1 of 4
G 5/8" BSP – Male
N/A
Jumper Valve/ Ceramic Disc
Min
50
Max
500
Min
5
Max
65
N/A
Brass
Advertisement
Related Manuals for Galvin Engineering WaterMark 46638
Summary of Contents for Galvin Engineering WaterMark 46638
- Page 1 Jumper Valve/ Ceramic Disc Working Pressure Range (kPa) Working Temperature (°C) Nominal Flow Rate (LPM) Finish Brass NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED − Spanner and hex key − Thread tape...
- Page 2 Refit adaptor and reassemble handle by reversing step 1. When installation is complete, slowly open Note: do not tighten cartridge using the water supply and inspect for leaks. handle as this will result in damage to the cartridge © Galvin Engineering Pty Ltd...
- Page 3 Build up of scale on spindle, spindle Remove jumper valve, clean and worn or o-ring has been damaged regrease. Replace o-ring. Complete SBA may need to be replaced. Handle is loose Screw has come loose Tighten handle screw © Galvin Engineering Pty Ltd...
- Page 4 Version 1, 4 November 2022, Page 4 of 4 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty.