Table of Contents
Advertisement
Sm@rtGear™ IE User Manual
6. VL Monitoring Screens
6.1 Breaker Dashboard
The upper segment of the Breaker Dashboard contains three Breaker Gauge sections. Each Breaker Gauge contains tags for the fol-
lowing values:
• Phase Unbalance Current
• Long Time Mean Current Average
• Current L1
• Current L2
• Current L3
• Mean Current Average
• Current in Neutral Conductor
• Current to Ground
The Breaker Controls section is located in the lower left of the Breaker Dashboard screen. This section contains the Maintenance
Mode Activation switch and "activate" buttons for Close Breaker Request, Open Breaker Request, View Timers and Alarm Reset. Note:
Close Breaker Request and Open Breaker Request are disabled for VL breakers.
The Breaker Status section is located in the lower right of the Breaker Dashboard screen. This section displays a green light when the
following values are present: Breaker Open, Breaker Closed, Breaker Tripped and Breaker DAS.
6.2 Metering
The Current section is located in the upper left of the Metering screen. This section displays readings for L1 Current, L2 Current, L3
Current, Mean Current Average, Long Time Mean Current Average, Neutral Current, Ground Current, and Phase Unbalance Current.
The Max Current section is located in the upper right of the Metering screen. This section displays limits for Max Current Average,
Max Mean Current Average, Max Long Time Mean Current Average, Max Neutral Current, Max Ground Current, and Max Phase
Unbalance Current.
The Breaker Control section is located in the lower left of the Metering screen. This section contains the "Activate" button to Reset
Min/Max.
(Insert Figure" vlBreakerMetering")
34
Advertisement
Table of Contents
