Threshold Warnings - Siemens SmartGear IE User Manual

5.8 Threshold Warnings

All breaker threshold warning parameters are viewed and set from the Threshold Warnings screen.
The Voltage section is located in the upper left of the Threshold Warnings screen. This section contains parameters for the following values:
• Undervoltage
• Overvoltage
• Phase Unbalance Voltage
• THD Voltage
• Peak Factor
• Form Factor
The Current section is located in the mid left of the Threshold Warnings screen. This section contains parameters for the following values:
• Overcurrent
• Mean Value Current
• Ground Current
• Neutral Current
• Phase Unbalance Current
• THD Current
The Power section is located in the mid left of the Threshold Warnings screen. This section contains parameters for the following values:
• Active Power Normal Direction
• Active Power Reverse Direction
• Reactive Power Normal Direction
• Reactive Power Reverse Direction
• Apparent Power
• Mean Value of Apparent Power
• Mean Value of Active Power
• Mean Value of Reactive Power
• Power Factor Inductive
• Power Factor Capacitive
The Frequency section is located in the lower left of the Threshold Warnings screen. This section contains parameters for the
following values:
• Underfrequency
• Overfrequency
Sm@rtGear™ IE User Manual
31