Honda CRF125F 2022 Owner's Manual page 35

Adjusting the Front Brake Lever Position:
Never use adjusters other than those designed
for this motorcycle. Install a new adjuster from
the lever side with the lock nut under the head
of the adjuster.
1. Pull back the rubber dust cover (1).
2. Loosen the lock nut (2).
3. To position the front brake lever (3) farther
away from the handgrip, turn the adjuster
(4) clockwise.
To position the front brake lever closer to
the handgrip, turn the adjuster
counterclockwise.
4. Tighten the lock nut. Return the dust cover
to its normal position.
Lock nut torque:
5.9 N·m (0.6 kgf·m, 4.4 lbf·ft)
5. Apply the brake, release it, then spin the
wheel and check that it rotates freely.
Repeat this procedure several times.
6. Check freeplay by pulling in slowly on the
front brake lever until the brake starts to
engage.
Freeplay:
LESS THAN 20 mm (0.8 in)
If brake lever freeplay is not within this range,
see your dealer.
(4)
(2)
(3)
(1) Rubber dust cover
(2) Lock nut
Other Checks:
Make sure there are no fluid leaks. Check for
deterioration or cracks in the hoses and fittings.
(1)
(3) Front brake lever
(4) Adjuster
25