Table of Contents
Advertisement
MAINTENANCE GUIDELINES
Regularly and carefully cleaning the equipment prevents deterioration and product alteration.
CLEANING THE UNIT
Clean every week with only a damp piece of cloth and neutral soap each
external and internal surface, and dry them with a clean soft cloth
Never use flammable or abrasive products. The unit must never be cleaned
with water jets.
IMPORTANT: During maintenance and cleaning operations, make sure
that good visibility conditions exist in the working area, using other light
sources in case it is needed. Be very careful when working with moving
and/or high-temperature parts.
CLEANING THE CONDENSER COIL
Condensers accumulate dirt and require regular cleaning. Dirty condensers result in
compressor failure, product loss, and lost sales; which are not covered by warranty
If you keep the condenser(s) clean you will minimize your service expense and lower your electrical
costs. The following is a step-by-step guideline for the cleaning of the condenser(s):
1. Disconnect power to the unit.
2. Take off front lower grill assembly by removing the two (2) screws in the top corners.
3. Clean off accumulated dirt from the condenser coil(s) using a vacuum and/or a damp rag.
4. Replace the grill assembly.
5. Connect power to the unit and verify that when required the condensing unit(s) are running.
If you cannot remove the dirt adequately, please call your refrigeration service company.
•••• www.ojedausa.com • info@ojedausa.com • Pg. 9 ••••
IMPORTANT WARRANTY INFORMATION:
Part Number 100330051
Advertisement
Table of Contents
