ELECTRICAL REQUIREMENTS
The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a
standard 3-prong (grounding) NEMA 5-15R type wall outlet to minimize the possibility of electric
shock hazard from this appliance.
The use of extension cords is not permitted and will void the warranty.
RVP10SL, 12SL, 10, 12
RVP27
RVP500, RV2P49, RV3P72
Before connecting your equipment, check that the electrical data on the data plate match your electrical
output.
IMPORTANT NOTICE: P
APPROPRIATE CIRCUIT BREAKER ACCORDING TO THE NAMEPLATE AMPS
POSITIONING SHELVES
The shelves and holders have been fixed to the inside floor of
the unit to prevent their loss during transportation.
Insert the shelf clips in the pilaster notches making sure they are
at the same level such that the shelves remain horizontal.
IMPORTANT: The products on each shelf must leave three to
five centimeters of free clearance between them and the next
shelf in order to allow proper air circulation.
•••• www.ojedausa.com • info@ojedausa.com • Pg. 5 ••••
Voltage
Model
(V)
120
120
120
LUG THE EQUIPMENT INDEPENDENTLY TO A LOAD CENTER WITH AN
Current
Circuit
(A)
Required (A)
5.7
15
7.5
15
9.5
15
Part Number 100330051
.