Electrical Requirements; Positioning Shelves; Product Loading - Ojeda CTRH Series Installation And Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a

standard 3-prong (grounding) NEMA 5-13R type wall outlet to minimize the possibility of electric

shock hazard from this appliance.

The use of extension cords is not permitted and will void the warranty.

Model

CTRH-4

Before connecting your equipment, check that the electrical data on the data plate match your

electrical output.

IMPORTANT NOTICE: PLUG THE EQUIPMENT INDEPENDENTLY TO A LOAD CENTER WITH AN

APPROPRIATE CIRCUIT BREAKER ACCORDING TO THE NAMEPLATE AMPS.

The shelves and holders have been fixed to the inside floor of the unit to prevent their loss during

transportation.

Insert the shelf brackets in the pilaster notches making sure they are at the same level such that the

shelves remain horizontal.

IMPORTANT: The products on each shelf must leave three to five centimeters of free clearance

between them and the next shelf in order to allow proper air circulation.

The CTRH-4 is not intended to be a pull down refrigerator and as such the product must be loaded

at their intended merchandising temperature.

Before loading products, allow the equipment to operate empty for at least two hours.

When loading products: